Titan U glossary

Cold Air Damming

Cold air damming (CAD) is the trapping of a shallow layer of cold air against the side of a mountain range, often the east side, when the cold air is not strong enough to cross the barrier. In the eastern United States the classic case is a wedge of cold air east of the Appalachians, often called the Appalachian wedge.

Cold air damming (CAD) is the trapping of a shallow layer of cold air against the side of a mountain range, often the east side, when the cold air is not strong enough to cross the barrier. In the eastern United States the classic case is a wedge of cold air east of the Appalachians, often called the Appalachian wedge.

How the wedge forms

The classic setup starts with strong high pressure to the north. Clockwise flow around the high sends cold air in from the north or northeast, and the mountains block it, so it is channeled south along the eastern slopes.

The American Meteorological Society describes the cold air piling up against the barrier, which raises pressure along the slopes. If the damming lasts more than several hours, it can also produce a barrier jet.

Not one single setup

Research by North Carolina State University with the National Weather Service (NWS) sorted Appalachian events into several types. Classical events have a favorable parent high, hybrid events have a weaker high with precipitation at onset, and in-situ events form with little or no large-scale forcing once precipitation is already falling.

The process is not limited to the Appalachians. NWS Sacramento describes damming as relatively common over the far northern end of the Sacramento Valley.

What it does to the weather

Inside the wedge, cool and stable air tends to bring low clouds, fog, drizzle and occasional wintry precipitation. When warmer air rides over the top, the result can be freezing rain or sleet at the surface.

The stable layer also cuts off surface-based buoyancy. An NWS Greenville-Spartanburg severe weather climatology suggests damming may help explain fewer significant tornadoes over the northwest Piedmont.

Why it is hard to forecast

Lackmann and Stanton, in an American Meteorological Society conference paper, describe a characteristic model bias toward eroding the cold dome too early. The NC State research report also pointed to excessive vertical mixing in one operational model as a likely source of error.

Erosion can come from warm advection, daytime heating, low-level divergence, mixing across the top of the cold dome, or an advancing coastal or warm front. Forecasters weigh these against observations, since a shallow cold layer is easy for a model to mix out.

Keep going

How Cold Air Damming connects

Builds on 2

  • Cold Air Advection

    In the classic setup, cold air damming builds as flow around a high to the north carries cold air in, a form of cold air advection, until mountains block it.

  • Temperature Inversion

    Cold air damming traps a shallow, stable layer of cold air near the ground, so it builds on the idea of a stable layer with warmer air above colder air.

Contrasts with 1

  • Warm Nose

    Cold air damming holds a shallow cold layer near the ground, while a warm nose is the above-freezing layer aloft; when warm air rides over the wedge, freezing rain or sleet can result.