Titan U glossary

Melting Layer

The melting layer is the slice of the atmosphere where falling snow and other ice melt into liquid as they descend. Its top is the melting level, its temperature is typically at or slightly above 32°F (0°C), and it can be several hundred meters (roughly a thousand feet or more) deep because falling ice takes time to melt.

The melting layer is the slice of the atmosphere where falling snow and other ice melt into liquid as they descend. Its top is the melting level, its temperature is typically at or slightly above 32°F (0°C), and it can be several hundred meters (roughly a thousand feet or more) deep because falling ice takes time to melt.

What happens inside it

Flakes begin to melt at the top of the layer and, if the layer is deep and warm enough, finish somewhere below. Through that depth the layer holds a mix of dry snow, wet snow and drops.

Melting takes heat from the surrounding air. Under steady precipitation that cooling can hold the layer at 32°F (0°C), and because the cooling scales with precipitation rate, heavy precipitation can move the melting layer closer to the ground and let snow reach places expected to see rain.

Surface-based or elevated

When the melting layer reaches the ground, the question is whether snow survives the trip. As an example, the National Weather Service (NWS) office in Louisville notes that precipitation will likely stay snow at the surface when the melting layer is less than about 900 feet deep.

When the melting layer sits aloft over colder air, it is a warm nose. An elevated melting layer can support snow, freezing rain, sleet or a mix of all three, depending on how much melting and refreezing happens.

How forecasters find it

On a sounding, forecasters look for where the temperature, or better the wet-bulb temperature, rises above 32°F (0°C) on the way down. NWS Amarillo uses the wet-bulb zero height, where the evaporatively cooled temperature falls below 32°F, as one of its cues for snow versus rain.

On radar, the melting layer shows up as the bright band, which has its own entry.

What its depth alone does not tell you

Depth is not the only factor. NWS Louisville notes that large flakes, or a layer that peaks at only about 34°F (1°C), may need a deeper melting layer to melt completely.

The layer also shifts. Evaporation into dry air and melting itself can lower it, while warm air moving in aloft can deepen it, so forecasters track the trend through the event rather than one snapshot.

Keep going

How Melting Layer connects

Leads to 3

  • Hydrometeor Classification Algorithm

    Before classifying, the HCA estimates the melting layer and will not allow snow below it or pure rain above it, except for big drops.

  • Precipitation Type

    Precipitation type builds on the melting layer, since its height and depth help decide whether snow arrives as snow, rain, sleet or freezing rain.

  • Rain-Snow Line

    The rain-snow line builds on the melting layer, since it follows where that layer of melting meets the ground.

Includes 1

  • Warm Nose

    A warm nose is a melting layer that sits aloft over colder air near the ground, which is why it can produce snow, sleet, freezing rain or a mix.

Contrasts with 1

  • Freezing Level

    The freezing level is a single height where the air reaches 0 C, while the melting layer is the deeper slice below it where falling ice actually melts.

Measured by 1

  • Wet-Bulb Zero

    The wet-bulb zero height helps place where melting starts on the way down, and NWS Amarillo uses it as one of its cues for snow versus rain.

Seen in 3

  • Bright Band

    On radar, the melting layer shows up as the bright band, a ring of enhanced reflectivity where falling snow melts into rain.

  • Atmospheric Sounding

    Forecasters find the melting layer on a sounding by looking for where the temperature, or better the wet-bulb temperature, rises above freezing on the way down.

  • Correlation Coefficient

    The melting layer often shows a horizontal band of reduced correlation coefficient, which helps locate the freezing level in stratiform rain.