Radar latency is the delay between the moment a radar samples a storm and the moment that data appears on your screen. It builds from the time the radar takes to scan, the time to send and process the data and how often the display refreshes.
Where the delay comes from
A WSR-88D completes a full volume scan in roughly 4 to 10 minutes, depending on its volume coverage pattern (VCP). The first tilt of a volume is already minutes old by the time the last one finishes.
Moving the raw data is fast by comparison. A Radar Operations Center FAQ, last updated in 2011, says the radar bundles 120 radials at a time, which takes about 3 to 30 seconds depending on the scan strategy, and that data were generally available to users within about 35 seconds of collection.
Mosaics and apps add more
Products that blend many radars wait on several sites and run on their own cycles. Multi-Radar Multi-Sensor (MRMS) reflectivity mosaics, for example, update on a 2-minute cycle.
The National Transportation Safety Board warned pilots that a cockpit NEXRAD mosaic is always older than the age shown, and that its oldest data can exceed the displayed age by 15 to 20 minutes. App refresh timing adds its own delay on top of the data.
Why the storm has moved
A storm moving 40 mph covers about two-thirds of a mile per minute, so a 5-minute delay puts it more than 3 miles from where the image shows it. The hook or core on screen is where the storm was.
Check the scan time on each image, not only the time the app last refreshed, and project the storm forward along its motion.
What it does not tell you
Low latency does not make data more complete. A fresh lowest tilt can still miss low-level features far from the radar because the beam is high there, and a radar image is always a sample of the past, not a live view.
