Titan U glossary

River Stage

River stage is the height of a river's water surface above a fixed reference point, called the gauge datum, at one specific location. It is the number river forecasts and flood stages are written in, and it is not the same as the depth of the water.

River stage is the height of a river's water surface above a fixed reference point, called the gauge datum, at one specific location. It is the number river forecasts and flood stages are written in, and it is not the same as the depth of the water.

Height above a datum, not depth

The U.S. Geological Survey (USGS), which calls stage gage height, measures it from a reference point chosen for each site and generally placed below the streambed. Streams erode and fill in over time, so a datum that does not move keeps readings comparable.

Because that datum usually sits below the bed, the reading is typically larger than the actual water depth. The USGS states that gage height does not refer to the depth of the stream, so a stage of 10 feet does not mean the river is 10 feet deep.

How stage drives river forecasts

Flood thresholds are written in stage. Flood stage, for example, is an established gauge height above which a further rise begins to create a hazard to lives, property or commerce.

River models work in flow first. The Middle Atlantic River Forecast Center explains that hydrologists convert forecast streamflow to stage using a rating curve developed by the USGS through field measurements.

Each new forecast also takes in the latest rain. National Weather Service (NWS) Grand Rapids notes that if heavy rain has fallen since the previous forecast, the new stage forecast will likely change.

Where to see it

The National Water Prediction Service (NWPS) at water.noaa.gov, run by the National Oceanic and Atmospheric Administration (NOAA), became fully operational on 03/27/24, replacing the Advanced Hydrologic Prediction Service (AHPS) website. It shows observed and forecast stage on gauge hydrographs and past precipitation estimates, and NOAA has been adding flood inundation maps in phases.

What stage leaves out

Stage describes the water level at one point. It does not show how far water spreads across a floodplain, how fast it is moving or how much is flowing, which is where inundation maps and discharge estimates come in.

A rising stage also does not say when the rise will stop. That is the job of the crest forecast, and the shape of the rise over time is shown on a hydrograph.

Keep going

How River Stage connects

Leads to 2

  • River Crest

    A crest is the highest river stage a flood wave reaches at a given point, so it is stated in stage at that gauge.

  • Flood Stage

    Flood stage is written as a river stage, a gauge height above which a further rise starts to threaten lives, property or commerce.

Measured by 1

  • Stream Gauge

    River stage is measured at a stream gauge as the height of the water above a fixed datum at that site, not as the water's depth.

Seen in 1

  • Hydrograph

    Observed and forecast river stage are shown on gauge hydrographs, which trace the shape of the rise over time.