The Significant Hail Parameter, or SHIP, is a Storm Prediction Center (SPC) composite index built to separate environments that favor significant hail, 2 inches or larger in diameter, from environments that favor smaller hail. Values above 1 indicate an environment favorable for significant hail.
What goes into it
SHIP multiplies five ingredients and divides by a fixed constant. They are most-unstable CAPE (MUCAPE), the moisture of that most-unstable parcel, the 700 to 500 millibar lapse rate, the 500 millibar temperature and the 0 to 6 kilometer wind shear.
Each one does a job. Instability and moisture feed the updraft, steep midlevel lapse rates and cold air aloft favor hail growth, and deep shear supports the long-lived rotating updrafts that grow the largest stones.
How it was built
SPC developed SHIP from a large database of observed severe hail proximity soundings that were modified with surface observations. Several inputs are clamped: shear is held between 7 and 27 meters per second (roughly 14 to 52 knots), parcel moisture between 11 and 13.6 grams per kilogram, and the 500 millibar temperature is set to minus 5.5 degrees Celsius for any warmer value.
The value is then adjusted downward in weaker setups, when MUCAPE is below 1,300 joules per kilogram, the midlevel lapse rate is below 5.8 degrees Celsius per kilometer, or the freezing level sits below 2,400 meters (about 7,900 feet) above ground.
Reading the numbers
SPC states that values above 1 indicate a favorable environment for significant hail, and that maximum values of about 1.5 to 2 or higher are typically present when significant hail is reported.
SPC calls values greater than 4 very high, and National Weather Service (NWS) warning-decision training treats them as a sign that significant hail is extremely likely should a storm develop.
What it does not tell you
SPC stresses that SHIP is not a forecast hail size. It describes the environment, so it matters only if storms actually develop there.
On SPC mesoanalysis maps, bad surface observations that get into the model analysis can create an unrepresentative MUCAPE bullseye that inflates SHIP as well. Check the inputs before trusting a single high value.
