Titan U glossary

Smoke Plume

A smoke plume is the stream of smoke that rises from a fire and is carried downwind by the wind. Near the fire it is often a narrow rising column, and farther away it spreads into a broader, thinner layer that can drift for hundreds of miles.

A smoke plume is the stream of smoke that rises from a fire and is carried downwind by the wind. Near the fire it is often a narrow rising column, and farther away it spreads into a broader, thinner layer that can drift for hundreds of miles.

How high the smoke goes

Heat from the fire makes the smoky air buoyant, so it rises until it is no longer warmer than the air around it. The height where a fire's smoke enters the surrounding atmosphere is called the injection height, and it can sit inside the atmospheric boundary layer or above it.

That height shapes where the smoke ends up. A multi-model study published in 2026 found that smoke kept in the boundary layer mainly adds to regional surface pollution, while smoke injected into the free troposphere above it generally travels more efficiently and can reach other continents.

How the wind shapes it

Once the smoke stops rising, the winds at that level carry it. Winds often change speed and direction with height, so smoke from one fire can head in different directions at different levels.

The rising heat from an intense fire can build a pyrocumulus cloud on top of the column, and the most extreme cases grow into pyrocumulonimbus.

Seeing plumes from space

NOAA's Hazard Mapping System (HMS) combines satellite observations with trained analysts to map fires and smoke every day. HMS analysts find smoke mainly in visible satellite imagery, occasionally helped by infrared to tell smoke from cloud.

HMS analysts outline smoke areas using daytime GOES imagery and label each one light, medium or heavy density. The first smoke analysis of the day typically arrives between 11 a.m. and noon Eastern time.

What a plume map does not tell you

HMS smoke outlines carry no information about how high the smoke is or how deep the layer is. A heavy plume on the map may be well above the ground while the air people breathe stays relatively clean.

The AirNow Fire and Smoke Map, a joint effort of the U.S. Forest Service and the Environmental Protection Agency (EPA), notes that satellites detect smoke anywhere in the atmosphere, so plumes on its map may not affect air quality at the ground. Ground monitors and near-surface smoke forecasts are the better guide to what people breathe.

Visible imagery also does not work at night, so a plume's extent cannot be mapped this way overnight.

Keep going

How Smoke Plume connects

Builds on 2

  • Mixing Height

    How high a smoke plume can rise freely builds on mixing height, the depth through which rising smoke and fire columns can climb.

  • Atmospheric Boundary Layer

    Where a smoke plume ends up depends on whether it is injected inside the boundary layer or above it, which shapes surface pollution versus long travel.

Leads to 1

  • Pyrocumulus

    Pyrocumulus builds on a fire's smoke plume, forming as a cloud cap on top of the rising column of heated air and smoke.

Contrasts with 2

  • Near-Surface Smoke

    A smoke plume on a satellite map can be well above the ground, so near-surface smoke forecasts and monitors are the better guide to the air people breathe.

  • Fine Particulate Matter

    PM2.5 measures the particles people breathe at the ground, while a smoke plume on satellite imagery can sit aloft without raising PM2.5 below.

Seen in 1

  • Visible Satellite Imagery

    Smoke plumes are mapped mainly from visible satellite imagery, with infrared sometimes used to tell smoke from cloud.